New Optimiser dual zone woodstove thermometer

New Optimiser dual zone woodstove thermometer


Add to cart


Surface thermometer calibrated for both the stove top and stovepipe..


More details

No more guessing which woodstove thermometer to use! Condar’s new Optimiser is calibrated for both the stove top and stovepipe. Well-defined dual temperature zones ensure safe operation. Durable porcelain enamel finish. Recyclable thermoformed packaging easily opens and seals tight when closed. Straightforward illustrated instructions. Manufactured in Columbus, North Carolina USA.

Stove Top Thermometer Use Guide

Why it is intelligent to use a woodstove thermometer.

  • Burn Efficiently
    Even well-engineered woodstoves must be operated properly to achieve maximum efficiency. Many people burn their stoves unnecessarily “hot” and therefore fuel is wasted without generating additional room heat. Use a thermometer to know when the fire is consuming wood too fast, exceeding the manufacturer’s most efficient operating temperature zone.
  • Protect Your Woodstove
    It is impossible to know accurately, simply by looking at the flames, the temperatures of your woodstove and chimney flue. The thermometer warns you when your fire is too hot for your woodstove. Extend its service lifetime, by avoiding damage to metal components.
  • Burn More Safely
    When under-fired, woodstove fires are smoky, causing fire hazard from creosote tar build-up in the stovepipe. A woodstove thermometer tells you when your fire temperature is too cool, and again informs you when optimum temperature is achieved, so you can decelerate your burn rate before the woodstove gets too hot.

Instructions for Use
Place on your woodstove as recommended by your dealer or manufacturer, usually a position where the surface is hottest. Attaches magnetically.

Note: If your painted woodstove is new, to avoid marking paint, do not use thermometer until the stove paint has cured completely. One hot fire in a new stove will typically cure paint.

Not every woodstove thermometer is manufactured by the Condar Company. Acquire a genuine Condar thermometer and compare. The bimetallic coil is bigger and better. It is calibrated accurately. And made in Columbus, North Carolina USA with high standards of quality.


"The thermometer as well as the heat and the light from the fire are all helpful indicators of fire safety level of the wood-stove in operation.   Greater information brings about greater fire safety and fire prevention".

Michiko Filipak

Whistler, BC

"I originally purchased the Rutland because it was at the store I was at and it was cheap so I gave it a try.  After having poor results with the Rutland I did some research on the internet and read about the Condar line of thermometers and how much the users liked them.  So i purchased a Condar Inferno thermometer because it is engineered and calibrated for use on a stove top, also because of the quality that I read about and consistency of temperature readings".

Ryan Goth

Cross Plains, Wisconsin